Services

Technology Courses

The international training division of SMC Corporation focuses on the development of professional skills required for a wide range of industry. The experience of the SMC International Training team has allowed the development of flexible training systems to meet all kinds of needs budget.

SMC International Training has a clear commitment to offer Training adapted to the needs of every industry, which training orientated to the development of the professional expertise required for the most diverse sectors such as automation, pharmaceutical, semi-conductors, food processing, etc.

Courses are held in specially designed facilities, providing an ideal learning environment free from distractions and interruptions.

Class sizes are limited to reasonable numbers so that trainees can receive effective individual attention from qualified and experienced instructors.


No. Course Title Course Description Fees (RM) HRDF Scheme
1 SMCT P1 Practical Pneumatics 1 700 SBL
2 SMCT P2 Maintenance of Pneumatics System & Circuit Design 900 SBL
3 SMCT PLC1 Programmable Logic Controllers 1 850 SBL
4 SMCT PLC2 Programmable Logic Controllers 2 900 SBL
5 SMCT EP1 Practical Electro-Pneumatics 1 800 SBL
6 SMCT VT1 Workshop in Vacuum Technology 1 700 SBL
7 SMC MT1 Practical Mechatronic 1 1400 SBL

Please click here for the latest course schedule and registration form for SMC Automation (Malaysia) Sdn. Bhd.

SMC also provide FREE automation training to our customer. This free course is available upon request. Please contact our sales engineers.

To request or register the above course, please contact SMC Training Department at Tel. No. 03-56350590 or click here.


Course Description


SMCT P1

PRACTICAL PNEUMATICS

COURSE OBJECTIVES

Participant will have fulfilling 4 days (24 hours) course whereby they will be able to :

  1. Identify the needs of compressed air production and purification, construction and the components in pneumatic control systems.
  2. Identify and use of control schematics.
  3. Design, sizing and troubleshooting of pneumatic circuit.

TOPICS COVERED

  1. Production, processing and distribution of compressed air.
  2. Logic YES/NO, AND, OR
  3. Valves – 3/2, 5/2, 5/3, dual air pilot, single air pilot.
  4. Speed controllers,Needle Valve, Throttle relief valve, Quick exhaust valve
  5. Auto – return circuit
  6. Start and Stop button auto-circuit
  7. Interesting Pneumatic Components
  8. Sizing of cylinders and valves for projects
  9. Pneumatic Delay Timers
  10. Positioning


SMCT P2

MAINTENANCE OF PNEUMATIC SYSTEM & CIRCUIT DESIGN

COURSE OBJECTIVES

Participant will have fulfilling 4 days (24 hours) course whereby they will be able to :

  1. Identify the function and common parts that are easily subjected to wear in pneumatic components
  2. Design complex pneumatic circuits
  3. Identify the possible causes of failure in a complex pneumatic system.
  4. Use a systematic approach in fault finding and correction.

TOPICS COVERED

  1. Function and operation of air purification equipment.
  2. Common wearing of parts in pneumatic components.
  3. Preventive maintenance of pneumatic systems.
  4. Design of various controls (Logic, Memory, Time – Dependent)
  5. Reading of complex circuits with step diagram./li>
  6. Signal overlapping and various methods of signal cut-off
  7. Sequential design with supplementary conditions (Single / Continuos cycle, Manual / Automatic mode, Emergency Stop design etc.
  8. Practical Exercises with systematic troubleshooting.

SMCT PLC1

PROGRAMMABLE LOGIC CONTROLLERS 1

COURSE OBJECTIVES

Participant will have fulfilling 4 days (24 hours) course whereby they will be able to :

  1. Identify the structure and operation of PLC
  2. Identify the hardware configuration of the PLC
  3. Design and write PLC programs.

TOPICS COVERED

  1. Background of PLC development.
  2. PLC Hardware Design
  3. Types of PLC System
  4. PLC Programming (Ladder diagram)
  5. Logic and sequence projects
  6. Timer and Counter Applications
  7. Procedure for selecting PLC Systems.
  8. PLC System Maintenance
  9. Troubleshooting techniques
  10. Practical Exercises.

SMCT PLC2

PROGRAMMABLE LOGIC CONTROLLERS 2

COURSE OBJECTIVES

Participant will have fulfilling 4 days (24 hours) course whereby they will be able to:

  1. Identify different techniques in program writing.
  2. Identify the advantages of using serial interface.
  3. Documentation of a project.

TOPICS COVERED

  1. Serial interfacing
  2. System troubleshooting
  3. Program writing using Erasing – Shift Register Technique.
  4. Program writing using Shift Register Technique
  5. Program writing using Register Table
  6. Documentation
  7. Using of computer with PLCs
  8. Mini Projects
  9. Using advance commands in PLC.

SMCT EP1

PRACTICAL ELECTRO-PNEUMATIC 1

COURSE OBJECTIVES

Participant will have fulfilling 4 days (24 hours) course whereby they will be able to :

  1. Identify the construction and function of the components in Electro-pneumatic control systems.
  2. Identify and use of control schematics.
  3. Design, sizing and troubleshooting of Electro-Pneumatic circuits.

TOPICS COVERED

  1. Economical and technical aspects of Electro-Pneumatic Control Systems.
  2. Basic Electric theory.
  3. Logic YES/NO, AND, OR, NOT
  4. Valves – 3/2, 5/2, 5/3, Single and Double Solenoid Valve
  5. Relays and function
  6. Counters
  7. Sequential Circuit projects
  8. Positioning
  9. Sizing of cylinders and valves for projects.
  10. Delay Timers.

SMCT VT1

WORKSHOP IN VACUUM TECHNOLOGY 1

COURSE OBJECTIVES

Participant will have fulfilling 2 days (12 hours) course whereby they will be able to :

  1. Identify the construction and function of components used in a vacuum system.
  2. Identify and use of vacuum control system circuits.
  3. Basic design and troubleshooting of vacuum control system.

TOPICS COVERED

  1. Vacuum Pump System
  2. Peripherals in Vacuum System
  3. Complete Vacuum System Circuit
  4. Selecting of Vacuum Ejector
  5. Selection of Vacuum pad
  6. Practical
  7. Maintenance of Vacuum System.

SMCT MT1

PRACTICAL MECHATRONICS 1

COURSE OBJECTIVES

Participant will have fulfilling 4 days (24 hours) course whereby they will be able to :

  1. Design pneumatic/electro-pneumatic circuits
  2. Assemble and operate electro-pneumatic manipulators
  3. Make and modify electro-pneumatic manipulator program.
  4. Troubleshooting diagnosis and repair

TOPICS COVERED

  1. Theory bases of the electro pneumatics
  2. General overview of the project
  3. Pneumatic Diagram explanation
  4. Wiring diagram explanation
  5. Assembly procedures
  6. Grafcet in program planning
  7. Practical Activities

 

International Training

SMC International Training

The International Training Division of SMC Corporation focuses on the development of professional skills required for a wide range of industries. The experience of SMC International Training team has allowed the development of flexible training systems to meet all kinds of needs & budget.

SMC International Training has a clear commitment to offer Training adapted to the needs of every industry, where training is oriented to the development of professional expertise required for the most diverse sectors such as automation, pharmaceutical, semiconductors, food processing, etc.

Participants are taught the various techniques during product seminars & how SMC products can be used to achieve their automation requirements. These also include discussions & live product demonstrations that made the seminar a highly interactive event.

For more information on SMC International Training, please click here.

For more information on courses offered by our regional training centers, please click here.


Training Equipment

SMC International Training, the educational division of SMC corporation, develop and manufacture a wide range of training equipment to meet the need for skills training in industrial automation.

Didactic equipment: 17 product families, each of them offering multiple possibilities and different configurations to develop skills in automated industrial automated technologies.

eLearning courses: 16 courses imparting knowledge on the basic theory of these technologies.




For more information on SMC range of training equipment, please click here.

Sales Support

24/7 Sales Support

Anytime and Anywhere, sales support through phone






Conversion Guarantee Program

No question asked money back guarantee



Terms and conditions apply.

For detail, please feel free to contact SMC sales.

Engineering & Project Support

Special Application Projects
  • Control Panel System
  • Compressed Air Purification System
  • Module Project Support



Energy Saving Solution


Demonstration

You are always updated on latest products
  • Demo Van
  • Mini Panel
  • 3D Demo
  • Show Room




Plant tour in SMC




Actual exhibit at customer premises


Regional Logistic Center

Singapore

SMC Corporation (Singapore) Pte. Ltd

33, Tuas Avenue 8, Singapore 639251

Phone: 6861-0888 | Fax: 6861-1889
Email: sales@smcsing.com.sg

  • Floor area 18,826.14 m2
  • 30,000 products variations.
  • Over S$40 million stock.
  • Highly automated two-tier conveyance system.
  • Fast picking & packing process.


 Malaysia

SMC Automation (Malaysia) Sdn. Bhd.


(Formerly known as SMC Pneumatics (SEA) Sdn. Bhd.)

Lot 36, Jln Delima 1/1,
Subang Hi-Tech Industrial Park,
47500 Subang Jaya,
Selangor.

Phone : 603 – 5635 0590
Fax : 603 – 5635 0601
Email: sales@smcmy.com.my





The headquarter of SMC Malaysia is located at Subang Jaya (14,852 m2 ) stocked with approximately 30,000 items inventory. In addition, we have capability to ensure quick delivery to customer with support from the Regional Logistic Center in Singapore. Our extensive network of 4 sales offices and more than 30 distributors meet customers’ needs, thus ensuring prompt delivery and quick services across the country.

Main Inventory


Category Model
Directional Control Equipment AK, AKM, AV, LV*, PA, PB, SGC, SJ*, SQ, SX, SV, SY, SYA, SZ, VC*, VEX, VF*, VG, VH, VHK, VHS, VJ, VJA, VK, VM, VN*, VP*, VQ*, VR, VS*, VT*, VX*, VY, VZ*, XT*
Actuator C55, C65, C7*, C8*, C9*, CP9*, CA*, CB*, CC*, CG*, CJ*, CK, CL*, CM*, CNG, CPA, CQ*, CR*, CS*, CU, CUJ, CV3, CX*, CY3, CZ, D-, J-, L*, MA, MB*, MF, MG*, MH*, MI*, MK, MLU, MQ*, MRHQ, MSQ, MSU, MSZ, MU, MX*, MY1, NC*, RB*, REA, RHC, RJ, RLQ, RQ, RS*, ZCU
Modular FRL / Air Preparation Equipment AC*, AD*, AF, AFD, AFM, AK, AKM, AL, ALF, ALT, AMC, AMH, AMJ, AMP, AMR, AP, AR, ARB, ARG, ARJ, ARM, ARP, ARX, AUX, AV, AW, AWD, AWM, IR, IW
Fitting and Tubing / Flow Control Equipment AQ, AS*, DE*, DHF, D*, G, H, IQ, KA, KB, KC, KDM, KE, KF, KG, KJ, KK*, KM, KN, KP, KQ, KR, KS, KW, KX, L*, M, MS, S, T, TA, TB, TCU, TD, TE, TFU, TG, TH, TIA, TIU, TK, TL, TM*, TP, TQ, TR*, TS, TU*, TW
Vacuum Equipment GZ, PS, XL*, XM, XY, ZB, ZCU, ZF*, ZH, ZK, ZL, ZM, ZP*, ZQ, ZR, ZS*, ZU
Electric Equipment IS*, IT, ITV, PF*, PFM, PPA, PSE
Air purification Equipment AFF, AM, AMD, AME, AMF, AMG, IDF*, IDG, IDU*, IDK
Electric Actuator LE*, EMY, LC, LAT*, LX
Others AEP, AN*, AT, CH*, FG*, FH, FQ, HE*, HR*, IL, IP, IZ*, SF*, SR*, VBA, VMG



Inventory Management




Fast Delivery


Next Day Delivery
 
Strong Inventory
On Time Delivery



Local Production Cylinder

Short lead time

Third working day delivery




Terms and conditions apply.
For detail, please feel free to contact SMC sales.

Leave Us Your Question

We are always at your side. Contact us today.

Visit Us

Lot 36, Jalan Delima 1/1, Subang Hi-Tech Industrial Park, 47500 Subang Jaya, Selangor, Malaysia
Follow Us On

Switch to Mobile Version
Subscribe Newsletter